تاریخ در دسترس بودن
|مدل محصول||✅ HDL-MR0416.431|
|نصب و راه اندازی||35mm DIN rail installation|
|گارانتی||18 ماه گارانتی تعویض|
|خدمات پس از فروش||10 سال|
The HDL-MR0416.431 relay module can supply 4 channels with a current of 16A. Manual channel control is enabled via the modules on-board buttons. This module is able to support diversified devices, and can be applied to any solution which requires switching control.
Using a high performance magnetic launching relay the HDL-MR0416.431 does not consume any power in standby mode, and when the module is triggered it only uses a momentary DC Pulse.
Each of the 4 channels that the module outputs to support 16A. Due to the inclusion of a 50A magnetic relay, the module has a guaranteed stable performance, and lower maintenance requirements. This built in redundancy ensures the module has a long and efficient service life.
Thanks to the built in 50A magnetic relay, the module can handle a 500A current surge. This enables the module to switch multiple loads from a wide range of sources. From lighting, heating, motors, transformers, valves and power sockets, this module unifies and streamlines control into one simple to install and operate package.
Each channel has full manual control, and independent channel testing. This enables onsite switching of lights and dimming control even if the module is powered off.
All of the modules 4 channels feature a power on protection delay time; this delay time is adjustable from 0-60 minutes. This delay protection safeguards lights that are connected to the module providing a hassle free service and a maximized life expectancy.
■ 4-channel relay output unit.
■ Scene controller function available.
■ Up to 4 separate areas, each area has 8 scenes, maximum running time for scene is 60 minutes.
■ Each area has 2 sequences, each sequence has 12 steps.
■ Each channel has light protection delay (0-60 minutes).
■ Each channel has batch turn-on delay(0-25 seconds).
■ Each channel has manual control for relay unit.
■ You can select specified scene or scene before power off when the device restarts.
■ Supports easy programming and HDL Buspro online upgrading.
■ Communication: HDL Buspro.
-Relay: 50A Magnetic latching relay
-Max current in each channel: 16A
-Electronic life time of relay: >60000 (Resistance Load)
-Protection: Connect a breaker in each channel