تاریخ در دسترس بودن
|مدل محصول||✅ MHRCU.433 RCU|
|جریان ورودی||-Static power consumption: 60mA/DC24V -Dynamic power consumption: 300mA/DC24V|
|نصب و راه اندازی||35mm DIN rail installation|
|گارانتی||18 ماه گارانتی تعویض|
|خدمات پس از فروش||10 سال|
The RCU is a new generation of hotel Guest Room Control Unit which supports Hotel Host control, Mix control, Dry contact input, doorbell functions, and LED indication functions.
This multifunctional unit is capable of mixed relay output, dry contact input, dual communication protocols, and doorbell functions. It can also control and monitor different targets and devices such as panels, curtains, doorbell, lamps, fans, and air conditioning, etc.
Both RJ45 and HDL Buspro interfaces are supported.TheRJ45 IP interface enables the unit to connect to the existing Ethernet network in a hotel; this allows the hotel property management system and the hotel management software to share check-in/check-out data, and other valuable information. The HDL Buspro interface is used to connect modules in the HDL Buspro network like panels, doorbells, and sensors, etc.
The 17 channels which the RCU can output either 5A or 10A, these outputs enable the control of Incandescent lamps, halogen lamps, and low voltage halogen lamps.
Doorbell LED indication is supported and controlled via 5 dedicated channels from the RCU, this enables the doorbell to display the room number, and laundry, cleaning, and DND status.
A total of 24 dry contact inputs can be used as control targets via the hotel management software. It also enables the dry contact inputs to work with the LED outputs to manage and control 3rd party doorbells.
The host control functions
■ It supports 48 channels, each dimmer channel has parameters for lower limit, the higher limit, the maximum limit.
■ Total is 99 scenes, each scene’s running time is 0-250s.
■ Each relay channel has protection delay time (0-60mins).
■ Each relay channel can delay turn ON time (0-250s).
■ Can run the scene according to the status of card master.
■ Hotel host has RJ45 port for connection with reception or management center. With hotel management software,
this module can integrate with third-party management software.
Mix control functions
■ Channel 1 to 13 are relay outputs ,each channel is 5A. The load types are incandescent lamp, halogen lamp, low voltage halogen lamp.
■ Channel 14 to 17 are relay outputs, each channel is 10A.The load types are incandescent lamp, halogen lamp, low voltage halogen lamp.
■ Channel 18 to 21 are dimming outputs, each channel is 1A. It has short circuit protection, and the fuse is easy to replace. If the channel is short circuit or the fuse is wrong, the fuse indicator will flash.
■ Channel 22 is relay for doorbell, it can control the doorbell status.
■ 24-channel dry contract inputs.(The control target should be set from IHMS)
Door bell function
■ 5-channel LED outputs. (it can connect to the thirdparty door bell panel.)
-Signal interface: HDL Buspro, RJ45, INNER Buspro
-RJ45 interface: UDP/IP network Interface
-TRIAC: 16A TRIAC, minimum load is 30w
-Buspro terminal: 0.75-0.85mm single-core cable
-Relay output: 5A/10A